Apr 29, 2024  
2016-17 Academic Catalog 
    
Catalog Navigation
  Catalog Home
  Academic Calendar
  Academic Programs
  Courses
  Policies and Notifications for Students
  School of Arts, Humanities and Social Sciences
  School of Business and Information Technologies
  School of Engineering Technologies and Math
  School of Health & Patient Simulation
  School of Science and Engineering Transfer
  My Portfolio
HELP
2016-17 Academic Catalog [ARCHIVED CATALOG]

Courses

 

Energy Systems
  
  • EST-203 CCO

    EST-203 - HVAC Electrical Applications

    3 credits
    The course will offer the student the ability to utilize the theory from previous courses in real world electrical HVAC applications. Course content will include further and continued study of electrical systems and circuitry including: controls, schematics, troubleshooting and computer based system analysis.

    Prerequisite(s): EST-100  and EST-200 ;

    Course previously known as: ENGY-435
  
  • EST-204 CCO

    EST-204 - Heating System Design

    3 credits
    A lecture course designed to acquaint the student with the proper principles used in designing heating systems. A thorough coverage is made of heat transfer through building materials essential in the calculations of heat losses, for both residential and commercial structures. The student will develop the knowledge required to design efficient heating systems.

    Course previously known as: ENGY-320
  
  • EST-205 CCO

    EST-205 - Adv. Heating System Design

    4 credits
    This course is designed to acquaint the student with proper principles and procedures in designing steam and hot water heating systems. Topics include specifications and data for piping and heating system components such as boilers, heat distributing units, pumps, valves, and fittings. Instruction is given in the layout of one-pipe steam systems, series loop and one- pipe venturi forced hot water systems, and radiant heating systems. In addition, the sizing and piping of indirect domestic hot water heaters is covered.

    Prerequisite(s): EST-204  and MAT 078  or MAT 073  (minimum grade C-) or placement at Algebra I or higher on the math placement test.

    Course previously known as: ENGY-411
  
  • EST-206 CCO

    EST-206 - Microprocessor Controls

    2 credits
    This course is designed to acquaint the student with microprocessor-based control systems as used on residential, commercial, and industrial applications. A wide range of control devices is studied, ranging from a mechanical thermostat to a fully programmable digital controller. The laboratory portion of this course will provide the student with hands-on experience in the application of commercial and industrial control systems using microprocessor- based and programmable controllers.

    Prerequisite(s): EST-101 ;

    Corequisite(s): EST 206L  

    Course previously known as: ENGY-350
  

  • EST-206L - Lab: Microprocessor Controls

    1 credits
    This course is the laboratory component of EST 206  .
  
  • EST-207 CCO

    EST-207 - Bldg Management Systems

    3 credits
    This course is an in-depth study of computer- controlled building management systems monitoring all energy-related functions including the heating, air conditioning, lighting, and other environmental systems. The course will include system automation, sensors for monitoring various points in the facility, energy management system software, and remote access to the system. In the laboratory portion of this course, the student will interface the computer operations with the heating/air conditioning systems to provide a totally automated building environment.

    Prerequisite(s): EST-206 ;

    Corequisite(s): EST 207L  

    Course previously known as: ENGY-425
  

  • EST-207L - Lab: Bldg Management Systems

    1 credits
    This course is the laboratory component of EST 207  .
  

  • EST-281 - Energy Systems Co-Op 1

    3-9 credits
    This Cooperative Education course allows students to receive academic credit for off-campus educational work experience related directly to their major field of study.  Students who have completed 15 or more credits and who have achieved a 2.5 cum. QPA or higher are eligible to participate in Cooperative Education experiences. Approval for participation must be obtained from the applicable faculty coordinator and the Director of Cooperative Education.
  

  • EST-282 - Energy Systems Co-Op 2

    3-9 credits
    This Cooperative Education course allows students to receive academic credit for off-campus educational work experience related directly to their major field of study.  Students who have completed 15 or more credits and who have achieved a 2.5 cum. QPA or higher are eligible to participate in Cooperative Education experiences. Approval for participation must be obtained from the applicable faculty coordinator and the Director of Cooperative Education.
  

  • EST-283 - Energy Systems Co-Op 3

    3-9 credits
    This Cooperative Education course allows students to receive academic credit for off-campus educational work experience related directly to their major field of study.  Students who have completed 15 or more credits and who have achieved a 2.5 cum. QPA or higher are eligible to participate in Cooperative Education experiences. Approval for participation must be obtained from the applicable faculty coordinator and the Director of Cooperative Education.

Engineering and Science Transfer
  
  • EGR-101 CCO

    EGR-101 - The Creative Art of Structures

    3 credits

    Learn how to interpret and understand the built environment through technical, visual, and social analysis and critique of bridges, tall buildings, and structural designers.  The Creative Art of Structures is a modern history of structural engineering through the lens of excellence in design.  In a survey of some of the world’s most iconic structures-towers, tall buildings, bridges, and thin concrete shells-structural engineering will be presented as an art form rather than just a technical endeavor. Innovative structures will be studied from engineering, architectural, cultural, and social perspectives.  Structural engineers including bridge engineers Eiffel, Roebling, Robert Maillart, Christian Menn, and Othmar Ammann will be featured, as will tall building engineer Fazlur Khan and thin shell designers Dieste, Candela, and Isler.  Open to all students in any major-no engineering background is necessary.

     

    Prerequisite(s): ENG 101  and MAT 097   (minimum grade of C) or placement at college-level Math.
  
  • EGR-103 CCO

    EGR-103 - Computer Applications in Engineering

    3 credits
    An introductory course in engineering that utilizes various computer applications to assist in the analysis and communication of the design of an engineering assembly. One third of the course will be devoted to Computer Aided Drafting. Three-dimensional wireframe and solid models will be created. Orthographic projections, auxiliary views, isometric views, dimensioning, and assembly drawings will be discussed. The second third of the course will introduce the spreadsheet as an engineering problem solving tool that facilitates complex calculations, rapid graphical analysis, and numerical modeling. The remaining third of the course will be used to introduce design criteria for assembly, and oral and written presentations. The oral presentation will be facilitated using Power Point software.

    Corequisite(s): EGR 103L  

    Course previously known as: ENGR-203
  

  • EGR-103L - Lab: Computer Applications in Engineering

    1 credits
    This course is the laboratory component of EGR 103  .
  

  • EGR-111 - Intro Materials Science and Engr

    3 credits
    A survey of the materials of engineering and the atomic, molecular, and crystal phenomena responsible for their properties. The unifying theme is that the structures of materials determine their properties. Materials considered include alloys, semiconductors, polymers, and ceramics. Homework and tests are designed to build technical vocabulary and facility with tabulated and graphics data in solving basic materials analysis and design problems.

    Prerequisite(s): CHM-111 /CHM 111L  and MAT 131  

    Corequisite(s): PHY 231 /PHY 231L  

    Course previously known as: ENGR-330
  

  • EGR-121 - Mechanics 1

    3 credits
    This is the first mechanics course for engineering majors. It is a vector approach to the solution of equilibrium problems for particles, rigid bodies, and multi-membered structures (frames, machines, and trusses). In order to broaden the scope of problems available for analysis, the student is introduced to the study of friction forces and centroids. Also, for preparation for future mechanics courses, the topics of moment of inertia and shear and bending moments are introduced.

    Prerequisite(s): MAT-131  and PHY-231 ;

    Course previously known as: ENGR-310
  

  • EGR-122 - Mechanics 2

    3 credits
    Vector calculus is developed and applied to the solution of kinematic problems involving particles and rigid bodies. Different coordinate systems are utilized and kinetics analysis is applied using force balances, the impulse momentum principle, and the work energy theorem.

    Prerequisite(s): EGR-121 ;

    Course previously known as: ENGR-410
  
  • EGR-211 CCO

    EGR-211 - Probability and Statistics for Engineers

    3 credits
    This course will equip an engineering student with the knowledge needed to understand the interaction of variables in engineering design such as material failures, poor quality, missed schedules, and poor engineering. Topics to be covered include descriptive statistics measure of location and variability, discrete random variables, joint probability covariance and correlation, point estimate, confidence intervals, hypothesis testing, and linear regression.

    Prerequisite(s): MAT-132 ;

    Course previously known as: ENGR-411
  

  • EGR-219 - Mechanics of Materials

    3 credits
    Engineering applications of the principles of solid mechanics. Uniaxial and torsional problems are discussed followed by team deflections. Plane stress and strain are then presented, followed by stability problems in column design.

    Prerequisite(s): EGR-121  and MAT-132 ;

    Corequisite(s): EGR 219L  recommended.

    Course previously known as: ENGR-335
  
  • EGR-219L

    EGR-219L - Lab: Mechanics of Materials

    1 credits

    This course is the laboratory component of EGR 219 .  Established material testing techniques that provide physical observations to complement and reinforce concepts learned in EGR 219 .  Data collection, measurement, and experimental techniques to determine mechanical properties and stresses, strains, and deformations for various materials used in civil engineering.  Introduction to computer modeling of structural members.  Topics include mechanical properties of metals and concrete; concrete constitutent testing and mix design; concrete casting and hardened concrete testing; beam and column behavior; and analysis of structural members using modeling software.

     

    Corequisite(s): EGR 219 .
  
  • EGR-221 CCO

    EGR-221 - Circuit Analysis 1

    3 credits
    Mathematical models will be developed to describe the behavior of practical voltage and current sources and resistors, capacitors, inductors, diodes, transistors and operational amplifiers (op-amps). Techniques for the analysis of voltage, current and power relationships among these devices interconnected in circuits will be practiced. Analysis techniques will include Kirchoff’s Laws, Loop and Nodal Analysis, the Superposition Theorem and Thevenin’s and Norton’s Theorems. DC applications (constant in time) as well as AC applications (varying sinusoidally with time) will be considered. Treatment of AC applications will include an introduction to phasor analysis and the concept of complex frequency.

    Prerequisite(s): MAT-132  and PHY-231 ;

    Corequisite(s): EGR 225  

    Course previously known as: ENGR-320
  
  • EGR-222 CCO

    EGR-222 - Circuit Analysis 2

    3 credits
    A continuation of EGR-221 , this course develops mathematical tools for the analysis of circuits consisting of resistors, inductors and capacitors driven by voltage and current sources which are periodic functions of time. Topics covered include complex power, poles and zeros in the complex frequency domain, two-port transfer functions, forced and natural response, resonance, Fourier series and the LaPlace transform.

    Prerequisite(s): EGR-221 ;

    Corequisite(s): EGR 226  

    Course previously known as: ENGR-420
  

  • EGR-225 - Electrical Engineering Lab 1

    1 credits
    This course offers laboratory experiments that test the theoretical analysis techniques presented in EGR 221  . These experiments involve measurement of voltage and current signals in circuits consisting of resistors, inductors and capacitors. Operational amplifiers (op amps) are also investigated. Laboratory workstations are equipped with current-controlled and voltage-controlled power supplies, signal generators, digital multimeters, oscilloscopes and breadboards for interconnecting discrete devices. Computer Software will be introduced as a tool of analysis. A formal written report is required for each experiment.

    Corequisite(s): EGR-221  

    Course previously known as: ENGR-324
  

  • EGR-226 - Electronic Engineering Lab 2

    1 credits
    This course offers laboratory experiments that test the theoretical analysis techniques presented in EGR-222 . Circuits consisting of resistors, inductors and capacitors connected to signal generators will be investigated by measuring voltages, currents and impedances. Measurements will be made with AC meters and with oscilloscopes in the time domain and in the frequency domain. Students will investigate frequency response, resonance and amplification. Experiments will also investigate the characteristics of diodes, transistors and operational amplifiers driven by time-varying signals. The P-Spice computer program will be used as a tool of analysis. A formal written report on each experiment is required.

    Corequisite(s): EGR-222  

    Course previously known as: ENGR-427
  
  • EGR-229 CCO

    EGR-229 - Engineering Thermodynamics 1

    3 credits
    A classical presentation of thermodynamics including the first and second laws and their application to batch and flow processes. Ideal gas, real gas, graphical, and tabular relationships among the physical properties of substances which are affected by energy transformations including pressure, temperature, volume, internal energy, enthalpy, and entropy. Heat engines, heat pumps, and carnot cycles.

    Prerequisite(s): MAT-132 , PHY-231  and CHM-111 ;

    Course previously known as: ENGR-350
  
  • EGR-230 CCO

    EGR-230 - Engineering Thermodynamic Computational Lab

    1 credits
    This computational laboratory introduces the latest software, and discusses the various computational techniques necessary to permit students to solve all of their thermodynamic and related engineering problems with a computer. Analytical, graphical, and numerical methods are discussed. Students will take this course concurrently with EGR-229 . Engineering Thermodynamics, so that all of their homework will be submitted using the computer. A final capstone project will be required in this course.

    Corequisite(s): EGR-229  

    Course previously known as: ENGR-351
  
  • EGR-231 CCO

    EGR-231 - Introduction to Chemical Engineering

    3 credits
    An introduction to the material and energy balances commonly applied to processes in the chemical, petroleum and environmental fields. Also included is a study of the pressure volume temperature relationship of gases and a brief introduction to selected thermodynamic properties of solids, liquids, and gases. Computer solutions are utilized in selected problems.

    Prerequisite(s): MAT-132 , CHM-112  and EGR-103 ;

    Course previously known as: ENGR-340
  
  • EGR-232 CCO

    EGR-232 - Chemical Engineering Thermodynamics 1

    3 credits
    An introductory course dealing with the fundamental concepts and laws of thermodynamics and of the thermodynamic properties of materials. The major emphasis is on chemical systems.

    Prerequisite(s): EGR-231 ;

    Course previously known as: ENGR-440

Finance
  
  • BUS-105 CCO

    BUS-105 - Introduction to Personal Finance

    3 credits
    Foundations of financial planning are presented to prepare students to make informed choices in a consumer decision-making framework that leads to long-term financial security. Students learn to identify and evaluate choices and understand the consequences of their decisions. Topics include an overview of financial goal setting, budgeting, consumer buying, savings, credit cards, debt, student loans, loans, investments, real estate, insurance and retirement planning.

    Course previously known as: FINC-105
  
  • FIN-101 CCO

    FIN-101 - Introduction to Finance

    3 credits
    This course is designed to acquaint the student with the manner in which the financial system functions and with the techniques used to reach financial decisions. Major topics to be studied include the nature of money and financial institutions, central banking, securities markets, managing and financing of organizational assets. Special emphasis is given to financial decision-making.

    Prerequisite(s): DRG-092  and MAT-087  (minimum grade of C-) or placement at a higher level.

    Corequisite(s): ACC-101  

    Course previously known as: FINC-110
  
  • FIN-250 CCO

    FIN-250 - Investments

    3 credits
    This is a beginning course in investment management with special emphasis on the principles governing individual and institutional investment programs. Topics covered include the mechanics of investment, valuation tools, securities analysis and portfolio management.

    Prerequisite(s): FIN-101 ;

    Course previously known as: FINC-410
  

  • FIN-280 - Business Finance Internship 1

    3-9 credits
    This Cooperative Education course allows students to receive academic credit for off-campus educational work experience related directly to their major field of study.  Students who have completed 15 or more credits and who have achieved a 2.5 cum. QPA or higher are eligible to participate in Cooperative Education experiences. Approval for participation must be obtained from the applicable faculty coordinator and the Director of Cooperative Education.
  

  • FIN-281 - Business Finance Co-Op 1

    3-9 credits
    This Cooperative Education course allows students to receive academic credit for off-campus educational work experience related directly to their major field of study.  Students who have completed 15 or more credits and who have achieved a 2.5 cum. QPA or higher are eligible to participate in Cooperative Education experiences. Approval for participation must be obtained from the applicable faculty coordinator and the Director of Cooperative Education.

Fire Protection/Science
  

  • FST-101 - Fire Protection & Fire Prevention

    4 credits
    An introduction to fire science, with an emphasis on protection. This course includes a historical survey of fire services, principles of flame and smoke spread, flammable liquids, gases, explosions, residential and industrial hazards. It also provides an overview of residential and commercial fire safety inspections, safety demonstrations, extinguishing techniques, and public and news media relations.

    Course previously known as: FIRE-125
  

  • FST-110 - Bldg Construction

    3 credits
    An exploration of building construction and design with emphasis focused on fire protection concerns, review of statutory and suggested guidelines, local, state, and national.

    Prerequisite(s): FST-101  

    Course previously known as: FIRE-210
  

  • FST-120 - Organization and Management Of Fire Departments

    3 credits
    An exploration of organizational principles with emphasis on fire department organization; a study of the history, types, methods, and principles of fire department organization, both formal and informal, line and staff. Emphasis is placed on supervisory responsibilities and functions.

    Course previously known as: FIRE-220
  

  • FST-130 - Fire Protection Systems

    3 credits
    The detection and extinguishing systems of both automatic and manual types are studied, including sprinkler and standpipe systems, inert gases, foam and dry chemicals, temperature and smoke responsive devices, and alarm, and signaling systems. Demonstration will illustrate and supplement the class work. Required for graduation.

    Prerequisite(s): FST-101 ;

    Course previously known as: FIRE-330
  

  • FST-131 - Advanced Protection Systems

    3 credits
    This course is a continuation of FST-130  and it is presented for those people interested in advanced fire control systems. Sprinkler systems will be given a great amount of attention in this course.

    Prerequisite(s): FST-130  

    Course previously known as: FIRE-430
  

  • FST-140 - Fire Officership

    3 credits
    Fire department company officers play an important role in the coordination of the fire department’s goals and objectives. In most instances, they are the people who ensure that action is taken to accomplish day-to-day tasks. This course focuses on the basic principles of fire department organization, leadership principles, working relationships, and personnel management. For the firefighter aspiring to become a company officer, or for a company officer wishing to improve management skills, this course will help develop and improve the necessary skills to effectively manage the Fire Company.

    Prerequisite(s): FST-101  

    Course previously known as: FIRE-340
  

  • FST-210 - Fire Hydraulics and Equipment

    3 credits
    This course covers incompressible fluids, including fluid properties, principles of fluid status, fluid flow system principles, pipe friction and heat loss, flow measurements, pumps, and other hydraulic devices and machinery. Applications are related to fire protection systems such as sprinklers, standpipes, hoses, nozzles, pumpers, and water supply systems. Demonstrations will illustrate and supplement the principles developed in class. Required for graduation.

    Prerequisite(s): MAT-100  

    Course previously known as: FIRE-310
  

  • FST-220 - Fire Causes and Detection

    3 credits
    This course concerns the history development and philosophy of fire investigation and detection. Including inspection techniques, gathering evidence and development of technical reports, fundamentals of arson investigation, processing of criminal evidence and criminal procedures related to various state and local statutes.

    Prerequisite(s): FST-101 ;

    Course previously known as: FIRE-420
  

  • FST-230 - Hazardous Materials

    3 credits
    This course includes a review of basic chemistry, storage and handling of hazardous materials, laws, standards and fire fighting practices within extreme fire hazard areas. Demonstrations will illustrate and supplement the class work. Required for graduation.

    Prerequisite(s): CHM-101 ;

    Course previously known as: FIRE-410

French
  
  • FRE-101 CCO

    FRE-101 - Elementary French 1

    3 credits
    This is an introductory course for students with little or no previous background in French. Students are introduced to the French alphabet, diacritical marks, and phonics system. Basic grammar, vocabulary building, reading comprehension, and writing are also introduced. Basic listening comprehension skills and conversational skills are developed. The class is conducted in French as much as possible.

    Prerequisite(s): Placement at ENG-101  or its equivalent or permission of instructor.

    Mass Transfer Block: Credits earned in this course are counted towards the MassTransfer Block Humanities and Fine Arts requirements.

    Course previously known as: FREN-124
  
  • FRE-102 CCO

    FRE-102 - Elementary French 2

    3 credits
    This course is a continuation of FRE-101 . Students build on grammar skills i.e. present, past, and future tenses of verbs, expand vocabulary, reading comprehension and writing paragraphs and short compositions. Short stories and poetry are covered in class. Students expand their listening and speaking skills. The class in conducted mostly in French.

    Prerequisite(s): FRE-101 

    Mass Transfer Block: Credits earned in this course are counted towards the MassTransfer Block Humanities and Fine Arts requirements.

    Course previously known as: FREN-224
  
  • FRE-201 CCO

    FRE-201 - Intermediate French 1

    3 credits
    This course is designed to maintain and improve French language skills for those with a basic knowledge of the language. Students will continue to progress in grammar, pronunciation, speaking, reading, and writing skills. Students will also continue to study the culture and customs of people in Francophone countries. The class is conducted mostly in French.

    Prerequisite(s): FRE-102  (grade of C or higher), two years of high school French or permission of instructor.

    Mass Transfer Block: Credits earned in this course are counted towards the MassTransfer Block Humanities and Fine Arts requirements.

    Course previously known as: FREN-324
  
  • FRE-202 CCO

    FRE-202 - Intermediate French 2

    3 credits
    This course is a continuation of FRN-201. Emphasis is placed on oral and written expression of the language. A variety of modern reading selections representing writers from Francophone regions worldwide will be assigned and discussed in class during the semester. Review of grammar from previous semesters and introduction to some new grammar are presented. Classes are conducted in French.

    Prerequisite(s): FRE-201 

    Mass Transfer Block: Credits earned in this course are counted towards the MassTransfer Block Humanities and Fine Arts requirements.

    Course previously known as: FREN-424

Graphic Communications and Photography
  
  • GAT-122 CCO

    GAT-122 - Digital Workflow

    2 credits
    This lecture and lab course presents the various techniques, both traditional and electronic, of prepress preparation for printing. The lecture portion of the course will cover the specific requirements of image reproduction, including an overview of equipment materials, software, and technique. The process of laying out a print job in the most efficient and economical configuration will be emphasized. In the lab portion, students will be introduced to traditional pre-press techniques, including contacting, camera work, and film image assembly. Precision, calibration, and quality evaluation will be stressed.

    Corequisite(s): GAT 122L  

    Course previously known as: GRPH-122
  

  • GAT-122L - Lab: Digital Workflow

    1 credits
    This course is the laboratory component of GAT 122  .
  
  • GAT-125 CCO

    GAT-125 - Typography and Layout Design

    2 credits
    Typography & Layout Design is a course designed to introduce students to the basic elements of type, design, and page layout. The lectures will cover the history, specification, and aesthetics of type, both as text and design elements. The fundamentals of page layout will be covered with a focus on the effective visual presentation of type and images. In the labs, students will begin with the basics of designing & producing traditional art work and proceed to digital design and layout using current software. An emphasis on clean, functional design will be stressed.

    Corequisite(s): GAT 125L  

    Course previously known as: GRPH-125
  

  • GAT-125L - Lab: Typography and Layout Design

    1 credits
    This course is the laboratory component of GAT 125  .
  
  • GAT-131 CCO

    GAT-131 - Printing Technology

    3 credits
    This basic course is designed to introduce students to the printing industry. The story of printing is told chronologically through a series of lectures that cover the first attempts at communication, through the development of mass communication systems, to a vision of what the world of printing might be like in the future. Assignments are designed to challenge the student’s understanding of the purpose of mass communications through various printing processes in today’s society.

    Course previously known as: GRPH-131
  
  • GAT-135 CCO

    GAT-135 - Advertising Agency Management

    3 credits
    In this course, the student will learn the basic principles for setting up and managing a full-service advertising agency. The primary elements of the course will include the purpose of the five types of ad agencies and their unique characteristics and structure. The course will incorporate the basic business models used in the day-to-day operation of an agency including the managerial structure for both the business and creative aspects. Students will learn how marketing research interfaces with advertising, classification of advertising, and the various media available to achieve the goals of an integrated advertising campaign. Also covered will be media research, selection, and planning, media buying, budgeting, proposal development and presentation.

    Prerequisite(s): MKT 101  , GAT 263  , GAT 162   and GAT 125  
  
  • GAT-145 CCO

    GAT-145 - Introduction to Graphic Art Computer

    2 credits
    This introductory course begins students with the basic functions of the graphic arts computer, including how to understand computer specifications, hardware components, the history of the PC industry & the Internet, and popular graphic arts software applications. In the LABs, students learn step-by-step basic Macintosh computer functions used in all current applications, such as creating and saving files, reading and selecting from menus, disk operations, file management, backing up files, use of the Internet, and printing. This is a beginner course; therefore, students will work with self-paced tutorials being Adobe InDesign software, and receive constant instruction from the Professor. (Keep in mind that the computer is only a tool; learning it does not make you a designer.)

    Corequisite(s): GAT 145L  

    Course previously known as: GRPH-145
  

  • GAT-145L - Lab: Introduction to Graphic Art Computer

    1 credits
    This course is the laboratory component of GAT 145  .
  
  • GAT-150 CCO

    GAT-150 - Professional Digital Photography

    2 credits
    This course is an introduction to photographic processes that use computer based technologies. The student will learn the basics of image capture with both conventional and digital cameras. From there they will explore the world of digital image processing; including the electronic scanning of both reflective and transparent materials, the using of the Adobe Photoshop software to prepare and modify the images, and the outputting of black & white and color prints.

    Corequisite(s): GAT 150L  

    Course previously known as: GRPH-180
  

  • GAT-150L - Lab: Digital Photography

    1 credits
    This course is the laboratory component of GAT 150  .
  
  • GAT-151 CCO

    GAT-151 - Digital Photography/Studio Module

    2 credits
    Digital Photography Studio Module is an introductory digital photography course instructing students on the safe and proper operation of the department’s digital cameras, studio lighting equipment, and printers. There will be many hands-on, on-site demonstrations that will give students experience that will prepare them for higher level digital photography courses.

    Corequisite(s): GAT-150  

    Course previously known as: GRPH-181
  
  • GAT-152 CCO

    GAT-152 - Advanced Prof. Digital Photography

    2 credits
    This course is a continuation of the GAT-150  Digital Photography course that uses computer- based technologies to record and output photographic images. The student will learn advanced techniques in image capture with digital cameras. The students will continue to explore the world of digital image processing using the Adobe Photoshop software to prepare and modify images. Projects will include studio portraits, product photographs, macro-photographs, black and white conversion and color printing – with the emphasis on quality output.

    Prerequisite(s): GAT-150 ;

    Corequisite(s): GAT 152L  

    Course previously known as: GRPH-280
  

  • GAT-152L - Lab: Advanced Digital Photography

    1 credits
    This course is the laboratory component of GAT 152  .
  
  • GAT-155 CCO

    GAT-155 - Macintosh Operating Systems

    2 credits
    Since the Apple Macintosh computer has become a staple “tool” for electronic prepress, learning proper operating procedures and maintenance are essential for all Graphic Arts Technology students. This hands-on lecture course explores system software basics through custom configuration, including all five Macintosh microprocessor generations, disk management, files & folders, menus & hierarchies, System & Finder, loading & updating software, Mac OS X applications & utilities, font usage, file formats, file sharing & networking, troubleshooting, connecting peripherals & printing, and third party utilities used in today’s digital industry. Students’ final project will be a multimedia presentation using Apple software. Note: This course & lab are web-assisted.

    Prerequisite(s): GAT-125 , GAT 125L , GAT-145 , GAT 145L  or permission of instructor

    Corequisite(s): GAT 155L  

    Course previously known as: GRPH-455
  

  • GAT-155L - Lab: MacIntosh Operating Systems

    1 credits
    This course is the laboratory component of GAT 155  .
  
  • GAT-160 CCO

    GAT-160 - Introduction to Web Design

    2 credits
    This lecture and laboratory course is designed to introduce the concepts of the world wide website design and development. Students will learn the basics of HTML programming to create a home page that incorporates graphic, textural, and aesthetic perspectives. Each student will design a home page as part of the course. The present and future status of the world wide web will be discussed. Basic computer skills are required.

    Corequisite(s): GAT 160L  

    Course previously known as: GRPH-200
  

  • GAT-160L - Lab: Introduction to Web Design

    1 credits
    This course is the laboratory component of GAT 160  .
  
  • GAT-162 CCO

    GAT-162 - Digital Imaging-Photoshop

    2 credits
    This lecture and laboratory course covers the computer preparation of visual images for publication. The lecture part of the course will deal with such topics as scanning, image manipulation, and output requirements. A focus will be on the aesthetics of visual images. The laboratory part of the course will deal with the development of advanced skills using digital imaging programs such as Adobe Photoshop. Each student will produce a series of projects for this course to demonstrate his or her proficiency in digital image preparation.

    Corequisite(s): GAT 162L  

    Course previously known as: GRPH-462
  

  • GAT-162L - Lab: Digital Imaging-Photoshop

    1 credits
    This course is the laboratory component of GAT 162  .
  
  • GAT-170 CCO

    GAT-170 - Introduction to Digital Photography

    2 credits
    This course is designed as an introduction in the use of a “point- and -shoot” digital camera as well as the more advanced single lens reflex models The course is designed for those who are too intimidated to read the owners manual and would like to have the features and procedures associated with their camera explained and demonstrated. This course will also benefit those who have yet to decide what type of digital camera to purchase or to upgrade to a more advanced model. In addition to lectures and demonstrations, students will have hands-on experience using supplied digital cameras and computer work stations that will show them how to record, store, e-mail and reproduce their digital images. While there are no prerequisites for this course, a basic understanding of computer use would be helpful.

    Corequisite(s): GAT-170L.

    Course previously known as: GRPH-170
  

  • GAT-170L - Lab: Introduction to Digital Photography

    1 credits
    This course is the laboratory component of GAT 170 .

    Corequisite(s): GAT-170.
  
  • GAT-171 CCO

    GAT-171 - DSLR Photography

    3 credits
    This course is primarily designed around the operation and use of digital single lens reflex cameras, (DSLRs). This class should be of particular interest to amateur photographers who are contemplating an upgrade from point-and-shoot or smart-phone digital cameras. Students will be shown how to use the many attributes associated with a SLR digital camera. It is not required that students have access to a DSLR camera. Imaging software programs such as Photoshop Elements and Photoshop will be demonstrated and employed by the student in this course.

    Course previously known as: GRPH-270
  
  • ART-170 CCO

    GAT-174 - Airbrushing Techniques 1

    2 credits
    This studio course is an introduction to the materials, processes, and aesthetic considerations in airbrushing. Students will create a series of airbrushed paintings on a variety of substrates that emphasize individual expression, technical development, principles of pictorial composition and visual representation. No previous art background is required.

    Corequisite(s): GAT 174L  

    Course previously known as: ARTS-170
  

  • GAT-174L - Lab: Airbrushing Techniques 1

    1 credits
    This is the laboratory component of GAT 174  .

    Corequisite(s): GAT 174  
  

  • GAT-175L - Lab: Airbrushing Techniques 2

    1 credits
    This course is the laboratory component of GAT 175  .

    Corequisite(s): GAT 175  
  
  • GAT-220 CCO

    GAT-220 - Color Reproduction Processes

    2 credits
    This course is a three-credit lecture and laboratory course devoted exclusively to the reproduction of color images. The course will begin by exploring some of the many of the fascinating aspects of color, including the nature of light and color perception. From there, the course will delve into the world of color measurement and specification, including a look at various color spaces such as the Munsell and CIELAB. Topics also covered will include color printing characteristics, color standardization, hi-fi color, color proofing, and color management. The laboratories will be a combination of demonstrations and hands-on experiences including colorimetry, color evaluation, color scanning, image- setting, and proofing. The aim of this course is to develop the skills required of graphic arts professionals to make critical and accurate color judgments.

    Prerequisite(s): GAT-162 ;

    Corequisite(s): GAT 220L  

    Course previously known as: GRPH-420
  

  • GAT-220L - Lab: Color Reproduction Processes

    1 credits
    This course is the laboratory component of GAT 220  .
  
  • GAT-222 CCO

    GAT-222 - Color Management

    2 credits
    In GRPH-422 Color Management the student will learn the basic techniques for setting up and evaluating the quality of a prepress system. The calibration of a closed feedback loop will be the heart of the course with special emphasis on color management techniques. The course will use CIE based color models as the foundation for color specification and tolerancing. Students will learn techniques for ensuring that the final printed output of printed materials is predictable and match the requirements of the job. Also covered will be such topics as dot shape, screen frequency, screen angles, moire’ output resolution, and stochastic imaging.

    Prerequisite(s): Take GAT-220  or permission of instructor;

    Corequisite(s): GAT 222L  

    Course previously known as: GRPH-422
  

  • GAT-222L - Lab: Color Management

    1 credits
    This course is the laboratory component of GAT 222 .
  
  • GAT-225 CCO

    GAT-225 - Advanced Typography & Layout Design

    2 credits
    Advanced Typography & Layout Design is the continuation of Typography & Layout Design, emphasizing clean, functional design while working with more difficult professional elements of type, design, and page layout. The lectures will cover professional works from various sources, as students will learn to critique their own use of text and design elements. Projects will continue to stress primary design elements (learned in the previous course) as students follow directions from design concept to print. In labs, students will learn more effective visual presentation principles, work with 3-D design problems, and further learn professional uses of type and images. Students will continue to work with current layout software applications that are predominant in today’s print and digital media industry.

    Prerequisite(s): GAT 125  

    Corequisite(s): GAT 225L  
  

  • GAT-225L - Lab: Advanced Typography & Layout Design

    1 credits
    This is the laboratory component of GAT 225  

    Corequisite(s): GAT 225  
  
  • GAT-231 CCO

    GAT-231 - Screen Printing and Vinyl Printing

    2 credits
    This course is an introduction to the various applications of screen printing and vinyl printing. Student designed activities are supported by exercises that provide quality and control for printing process. Emphasis of the course is centered on establishing repeatability of the printing process by controlling variables; photographic stencil systems; single and multiple color image design, conversion assembly and transfer; sheet-fed manual and flat substrate printing applications of simple and complex close register line images. Vinyl printing students will design on different applications and apply it to substrates. Vinyl printing students will use various software.

    Prerequisite(s): GAT 131 .

    Corequisite(s): GAT 231L .
  
  • GAT-231L CCO

    GAT-231L - Lab: Screen Printing and Vinyl Printing

    1 credits
    This course is the laboratory component of GAT 231 .

    Corequisite(s): GAT-231.
  
  • GAT-235 CCO

    GAT-235 - Creative Concept Development for Advertising

    2 credits
    In this course, the student will learn design principles as they relate to the creation and production of advertisements for various media used in an integrated advertising campaign. Students will explore the creative processes including concept development, ad layout, comprehensive design, and the influence of copywriting in the design direction. As part of the practical application of these principles, student lab assignments will incorporate the processes used to create storyboards, radio copy, print ads, direct mail, and digital ads. Students will also be required to translate advertisement design concepts in production artwork as necessary for use in a variety of media.

    Prerequisite(s): GAT 125  , GAT 155  , GAT 263   and GAT 162  

    Corequisite(s): GAT 235L  
  

  • GAT-235L - Lab: Creative Concept Development for Advertising

    1 credits
    This is the laboratory component of GAT 235 

    Corequisite(s): GAT 235  
  
  • GAT-236 CCO

    GAT-236 - Packaging Design Concepts

    2 credits
    In this course, students will learn the aspects of the packaging industry and the array of materials and processes used in the design and production of packaging for consumer goods. Lectures will include the fundamentals of package construction, graphic design and production and the package’s relationship to the product itself. Laboratory projects will incorporate design concepts, layout execution, and preparation of production art for boxes, bottles, clamshell packages, labels, and specialty packages. Students will learn design and production techniques for shipper-displays and point of sale displays.

    Prerequisite(s): GAT 125  , GAT 155  , GAT 263   and GAT 162  

    Corequisite(s): GAT 236L  
  

  • GAT-236L - Lab: Packaging Design Concepts

    1 credits
    This is the laboratory component of GAT 236 

    Corequisite(s): GAT 236  
  
  • GAT-237 CCO

    GAT-237 - Internet Advertising Design

    2 credits
    In this course, the student will learn the principle elements of internet advertising including digital display ads, database marketing, targeted emailing and social media networking. Students will learn the principles of Search Engine Marketing and Search Engine Optimization and the practical application of each. The course will enable students to understand how to analyze online advertising campaigns using industry standard metrics to calculate the cost of the campaign and the generation of ad leads. Laboratory assignments will provide the opportunity to develop online advertising campaigns and design and produce internet advertising elements including masthead ads, skyscraper ads, roll-down advertisements, and in-content ads using graphic arts software such as Adobe Illustrator, Adobe Photoshop, and Dreamweaver.

    Prerequisite(s): MKT 101  , GAT 263  , GAT 162  and GAT 125  .

    Corequisite(s): GAT 237L  
  

  • GAT-237L - Lab: Internet Advertising Design

    1 credits
    This is the laboratory component of GAT 237  .

    Corequisite(s): GAT 237  
  
  • GAT-238 CCO

    GAT-238 - Integrated Advertising Campaign Development

    2 credits
    In this course, students will learn the origins of contemporary advertising and the relationship of marketing strategies and tactics. Students will become familiarized with the various stages involved in the execution of an integrated advertising campaign as well as key marketing principles such as segmentation, targeting, and positioning, that determine the creative direction and elements used in the design and production of advertisements. Laboratory assignments will encompass all aspects for planning, developing, and executing all advertisement elements required to produce an integrated promotional campaign. The student will be required to create and produce advertisements for use across multiple-media platforms using graphic arts software such as Adobe Illustrator, Adobe Photoshop, and, Adobe Dreamweaver.

    Prerequisite(s): GAT 125  ,  GAT 135  , GAT 263  , GAT 162   and DMP 102  

    Corequisite(s): GAT 238L  
  

  • GAT-238L - Lab:Integrated Advertising Campaign Development

    1 credits
    This is the laboratory component of GAT 238  .

    Corequisite(s): GAT 238  
  
  • GAT-245 CCO

    GAT-245 - Digital Portfolio Workshop

    2 credits
    This is a portfolio workshop in which students utilize the advanced technical skills that they acuired in previous Graphic Arts Technology courses. Students will be introduced to various graphic arts and multimedia software programs. The course will emphasize the development of subject matter, design techniques, and execution of audio-visual elements. Along with a resume detailing their technical and creative skills, students will be required to produce several complexand involved projects. The primary focus of the course will be to develop a digital multimedia porfolio,which demonstrates the student’s proficiency in various software applications. This portfolio can be used for future academic or professional employment presentations. This course & lab are web-assisted.

    Prerequisite(s):  GAT-162 , GAT 125 , GAT 225 , GAT 150  and GAT 155 . 

    Corequisite(s): GAT 245L  

    Course previously known as: GRPH-445
  

  • GAT-245L - Lab: Digital Portfolio Workshop

    1 credits
    This course is the laboratory component of GAT 245  .

    Corequisite(s): GAT 245  
  
  • GAT-250 CCO

    GAT-250 - Photographic Illustration

    2 credits
    Photographic Illustration is an advanced digital photography course allowing students to express themselves through photography. The student will develop strong artistic and advanced digital image compositing skills. Fine art photography, still life photography, and photojournalism will be emphasized. Students will become skilled at electronic set building, and location photography. They will produce a series of projects, including some that will be self-directed. Additionally, students will be encouraged to study and create innovative photographic techniques. Critiques are held to provide the students feedback for their work.

    Prerequisite(s): GAT-152  or permission of instructor

    Corequisite(s): GAT 250L  

    Course previously known as: GRPH-283
  

  • GAT-250L - Lab: Photographic Illustration

    1 credits
    This course is the laboratory component of GAT 250  .
  
  • GAT-251 CCO

    GAT-251 - Advertising Photography

    2 credits
    Advertising Photography is an advanced digital photography course requiring students to produce images that command the viewer’s attention. The students will develop strong artistic and technical visual problem solving abilities, primarily in a studio environment. Product photography, fashion photography and food photography will be emphasized. Additional emphasis will be on client communication, professional business practices, and publication design. The students will produce an advertising publication using their own photographic and graphic design skills. Critiques are held to provide the students feedback for their work.

    Prerequisite(s): GAT-152 ;

    Corequisite(s): GAT 251L  

    Course previously known as: GRPH-281
  

  • GAT-251L - Lab: Advertising Photography

    1 credits
    This course is the laboratory component of GAT 251  .
  
  • GAT-252 CCO

    GAT-252 - Location Photography

    2 credits
    An advanced digital photography course concentrating entirely on location photography. The student will learn how to utilize existing light and reflectors to produce professional quality photographic images. The student will become skilled using speed lights, both on and off the camera, and the many modifiers that are available for small flash photography. In addition, the student will use portable, professional on-location flash lighting, applying their in-studio lighting experience for on-location shoots. The student will learn how to make proper lens choices based on the location’s constraints. Students will produce a series of projects, including some that will be self-directed. Critiques are held to provide the student feedback regarding her/his work.

    Prerequisite(s): GAT 152  and GAT 152L .

    Corequisite(s): GAT 252L .
  
  • GAT-252L CCO

    GAT-252L - Lab: Location Photography

    1 credits
    This course is the laboratory component of GAT 252 .

    Corequisite(s): GAT-252.
  
  • GAT-260 CCO

    GAT-260 - Digital Press Production

    2 credits
    This course will familiarize the student with the theory and operation of the Canon Digital press. The technical components of these presses will be detailed detailed emphasizing the advantes and limitations of the process, enabling the student to maximize his/her design capabilities. Printinting substrates will be presented in detail along with color matching systems. Laboratory exercises will familiarize the student with operation of digital press.

    Prerequisite(s): GAT-131 ;

    Corequisite(s): GAT 260L  

    Course previously known as: GRPH-361
  

  • GAT-260L - Lab: Digital Press Production

    1 credits
    This course is the laboratory component of GAT 260  .
  
  • GAT-261 CCO

    GAT-261 - Digital Publishing

    2 credits
    This lecture and laboratory course covers the computer preparation of graphic elements for publication. In the lecture part of the course the topics of publication planning and organization, imaging requirements, color, and applications software will be discussed. An emphasis will be placed on how the finished job will look. The laboratory part of the course will be made up of a series of progressively more complex exercises designed to develop the student’s skills on page layout software.  Each student will design and produce a series of projects for this course.

    Prerequisite(s): GAT-125 ;

    Corequisite(s): GAT 261L  

    Course previously known as: GRPH-461
  

  • GAT-261L - Lab: Digital Publishing

    1 credits
    This course is the laboratory component of GAT 261  .

    Corequisite(s): GAT 261  
  
  • GAT-262 CCO

    GAT-262 - Professional Digital Imaging Techniques

    2 credits
    Professional Digital Imaging Techniques is an advanced digital imaging course focusing on digital image manipulation using the Adobe Photoshop program. This course will teach students how to professionally modify their digital images to address specific imaging problems, including distortion and perspective correction and control, processing of RAW digital images, advanced defringing and retouching techniques, advanced image compositing and stitching techniques, high quality inkjet color and grayscale printing techniques, as well as other topics. Students will be given a series of projects that will incorporate the learned techniques.

    Prerequisite(s): GAT-162  or permission of instructor

    Corequisite(s): GAT 262L  

    Course previously known as: GRPH-282
  

  • GAT-262L - Lab: Prof. Digital Imaging Techniques

    1 credits
    This course is the laboratory component of GAT 262  .
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 -> 12